Backflow Testing & Prevention in Hollywood, FL
Backflow testing and prevention in Hollywood, FL checks the valve that stops dirty water from flowing back into the drinking supply, and replaces or repairs it if it fails. Call (954) 697-4920 to schedule a test and get a price before work begins.
- Annual test schedule
- Irrigation and commercial assemblies
- Repair if it fails
The Local Rule
What Hollywood's City Code Says About Backflow Testing
Section 51.210 of the City of Hollywood code, adopted in Ordinance O-2015-29 on December 2, 2015, requires every mandatory backflow prevention assembly to be professionally tested at least annually. The customer is responsible for hiring a certified backflow assembly tester and for submitting the results to the Building Division.
The same section lets the utility interrupt water service to the private system if the documentation is missing. For a restaurant or an apartment building, a shutoff is a far bigger cost than the test.
The state rule behind local programs is Chapter 62-555 of the Florida Administrative Code, which sets cross-connection control standards for public water systems.
Check the date on your last report now. If it has passed a year, schedule the test before the city asks.
What You Might Notice
Signs a Backflow Device Needs Attention
Most owners learn about a failed device from a notice or a test. These signs mean test sooner:
A city letter or tag
A notice that a device is due, overdue or failed its last test.
Water dripping at the relief port
A steady drip from an RPZ assembly can mean a failed check valve.
Dirty water from sprinkler heads
Cloudy or discolored water in an irrigation zone.
A new irrigation system
New systems need a backflow preventer and a first test.
Frost or storm damage
Impact and weather crack bodies and test cocks.
Safety
What to Do If Tap Water Looks or Smells Wrong
- Stop drinking, cooking with or brushing teeth with the water until you know the cause.
- Check whether the problem is only on irrigation lines or on indoor taps too.
- Contact Hollywood Public Utilities, which issues any boil-water notice and tests the system.
- Turn off irrigation until the assembly is tested.
- Call us to test or replace the assembly once the source is identified.
Device Types
Which Backflow Assembly Do You Have?
| Type | Where you usually see it | What the test checks |
|---|---|---|
| Pressure vacuum breaker | Residential irrigation | Air inlet and check valve open and seat properly |
| Double check valve assembly | Lower-hazard commercial and fire lines | Both check valves hold pressure |
| Reduced pressure zone assembly | High-hazard commercial, restaurants, medical | Two checks and the relief valve opens when it should |
A tag on the body usually lists the model. If you cannot read it, describe the device on the call and we confirm the type at the visit.
Notice on your door or a failed test?
Call and we schedule the test and quote any repair.
The Visit
How a Backflow Test Visit Works
- 1
Identify
Confirm model, size and location.
- 2
Test
Run the differential pressure sequence.
- 3
Report
Record readings and pass or fail.
- 4
Fix
Repair or replace a failed assembly and retest.
Why It Matters
Why a Check Valve Is Worth Testing Every Year
A backflow preventer sits idle most of the year. Rubber seals harden, springs weaken and debris lodges on a seat, and nothing looks wrong from outside. The test is the only way to learn a valve is not sealing.
South Florida adds its own wear. Constant irrigation, sandy soil that finds its way into valve bodies and summer storms that spike line pressure all work against these assemblies, so waiting for a visible problem is a poor test.
Restaurants and shops in Pembroke Park and across Hollywood fall under the same annual test, and the commercial plumbing page covers the wider checklist. If a vehicle or fence work breaks the assembly body, water leaks onto the ground and the device needs repair or replacement. When the water source is unclear, leak detection testing separates a damaged assembly from a leak elsewhere on the supply line.
Around Hollywood
Backflow Assemblies at Hollywood Properties
Irrigation assemblies serve the lawns and medians of Hollywood neighborhoods from Hollywood Hills to the lakefront blocks. Commercial assemblies protect restaurants and offices around Young Circle and the Hollywood Boulevard corridor.
Hollywood's code requires backflow protection, and many properties must test the assembly each year. Keep the report with your property records.
Pricing
What Shapes the Price of Backflow Testing
Insurance does not cover required testing or maintenance. For your exact number, call (954) 697-4920.
Questions
Backflow Testing Questions
Yes. Section 51.210 of the Hollywood city code requires each mandatory backflow assembly to be tested at least annually by a certified tester, with results submitted to the Building Division. The utility may interrupt water service to a property that does not provide the documentation.
Commercial properties, fire lines and irrigation systems are the usual cases. Since 1990, the Florida Building Code has required a backflow preventer on residential irrigation systems.
A certified tester attaches a differential pressure test kit to the assembly's test cocks, runs a sequence that checks each check valve and relief valve, and records the readings on a report.
It can be a failing device. A dripping relief port on a reduced pressure assembly, or water that spits from a head, is a reason to test now and not wait for the annual date.
Parts like rubber seals and springs can often be replaced and the assembly retested. If the body is damaged, replacement is the answer. For related pipe damage, leak tracing finds leaks on the supply side.
Yes. Restaurants, shops, apartment buildings and fire lines all use assemblies that need testing, and the quote reflects the number and size of devices.
City Notice About Your Backflow Device?
Call and we plan the test around your device type.
Call (954) 697-4920